spec no: dsal0563 rev no: v.2 date: mar/07/2011 page: 1 of 6 approved: wynec checked: allen liu drawn: j.yu erp: 1101029140 t-1 (3mm) solid state lamp part number: WP710A10YC yellow features z low power consumption. z popular t-1 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. description the yellow source color devices are made with gallium arsenide phosphide on galliu m phosphide yellow light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsal0563 rev no: v.2 date: mar/07/2011 page: 2 of 6 approved: wynec checked: allen liu drawn: j.yu erp: 1101029140 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 WP710A10YC yellow (gaasp/gap) water clear 10 30 34 iv (mcd) [2] @ 10ma symbol parameter device typ. max. units test conditions peak peak wavelength yellow 590 nm i f =20ma d [1] dominant wavelength yellow 588 nm i f =20ma ? 1/2 spectral line half-width yellow 35 nm i f =20ma c capacitance yellow 20 pf v f =0v;f=1mhz v f [2] forward voltage yellow 2.1 2.5 v i f =20ma i r reverse current yellow 10 ua v r = 5v parameter yellow units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 140 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsal0563 rev no: v.2 date: mar/07/2011 page: 3 of 6 approved: wynec checked: allen liu drawn: j.yu erp: 1101029140 yellow WP710A10YC
spec no: dsal0563 rev no: v.2 date: mar/07/2011 page: 4 of 6 approved: wynec checked: allen liu drawn: j.yu erp: 1101029140 packing & label specifications WP710A10YC wp710a10xxx
spec no: dsal0563 rev no: v.2 date: mar/07/2011 page: 5 of 6 approved: wynec checked: allen liu drawn: j.yu erp: 1101029140
spec no: dsal0563 rev no: v.2 date: mar/07/2011 page: 6 of 6 approved: wynec checked: allen liu drawn: j.yu erp: 1101029140
|
